If you're looking to install a towel radiator in your bathroom, it's important to ensure that it's fitted properly to the existing pipe work. Here's a step-by-step guide on how to fit a towel radiator to your existing pipework and valves:
1) Turn off the central heating: Before you begin, it's important to turn off the central heating to ensure that the radiator is cool and safe to work with.
2) Drain the radiator: To avoid any water leaks or damage, you will need to drain the radiator of any water. Locate the valve that controls the flow of water to the radiator and close it. Then, open the bleed valve at the top of the radiator to let the water drain out. You may need to use a bucket or bowl to catch the water.
3) Remove the old radiator: Once the radiator is drained, you can remove the old radiator from the wall. Use a wrench to loosen the nuts that secure the radiator to the valves, and carefully lift the radiator off the wall.
4) Prepare the new radiator: Before fitting the new towel radiator, you will need to ensure that it's ready for installation. If the radiator requires assembly, follow the manufacturer's instructions to put it together. Then, attach the brackets to the back of the radiator. It's important to make sure that the brackets are level and securely attached.
5) Install the radiator: Once the new radiator is prepared, you can install it onto the existing valves. Attach the valve tails using the nuts provided, and ensure that the radiator is level.
6) Connect the valves: Once the radiator is securely attached to the wall, you can connect the valves to the radiator. Use a wrench to tighten the nuts that connect the valves to the radiator. It's important to ensure that the valves are securely attached to the radiator and that there are no leaks.
7) Refill the radiator: Once the radiator is securely attached, you can refill it with water. Close the bleed valve and open the valve that controls the flow of water to the radiator. Wait for the radiator to fill up, and then check for any leaks.
8) Bleed the radiator: Once the radiator is filled with water, you may need to bleed it to remove any air bubbles. Use a radiator key to open the bleed valve at the top of the radiator and release any trapped air.
9) Turn on the central heating: Once the radiator is installed and filled with water, you can turn on the central heating and test the radiator to ensure that it's working properly.
In conclusion, fitting a towel radiator to existing pipe work and valves is a straightforward process that can be done with the right tools and instructions. By following these steps, you can install a new towel radiator and enjoy the benefits of warm, dry towels and efficient heating in your bathroom.