Chrome Towel Radiator 600mm Wide 1150mm High

To install this radiator as part of your central heating system, you will need a pair of valves to connect it to your pipe work. Which type of valves you need will depend on yourt pipe work.

If the pipe work is coming out of the floor facing the ceiling, you will need a pair of straight (inline) valves but if the pipe work is coming out of the wall, you will need a pair of corner or angled valves. 

To install this radiator as a stand alone electric only, you will need an electric heating element and a blanking blug. You can select a standard or a thermostatic element as all options below are campatible for this towel radiator and with recommended wattage for this towel radiator.

Tip!: A high wattage heating element does not mean you will get more heat out of the radiator. Regardless of the wattage of the electric element, you will still be limited the heat output of the towel radiator in question. A higher wattage electric element however will mean that the water inside the radiator will heat up quicker.

To install this radiator as dual fuel, you will need an electric heating element and some additional parts which will depend on your pipe work. You can select a bundle from options below as per your pipe location with a standard or a thermostatic element. 

These elements and parts are all compatible with this radiator with the best possible and recommeded element wattage for a dual fuel use type installtion.