For those properties without central heating, here we have a pre-filled electric towel rail which comes complete with a 400 watt standard type electric heating element, blanking plugs and it is pre-filled with deionised water based solution containing a mix of central heating preservatives and inhibitors. No other parts required to install and run this towel rail as electric only. Simply remove one of the blanking plugs from the bottom of the towel radiator (Opposite side of the bleed valve. - if the bleed valve is on top-right, remove blanking plug from bottom-left), insert and secure the electric heating element supplied to this inlet point and affix the radiator using the brackets supplied on to your wall, connect heating element to your fused spur power outlet.
Width: 500mmHeight: 1150mmTotal Projection: 90-110mmRadiator Heat Output: 402 Watt - 1372 BTU/h @ Delta 50Element Type & Power: 400 Watt Standard Electric Heating ElementWater Intake:5.28 litresPressure:8 Bar (Safety Tested)Finish: Chrome PlatedMaterial: SteelDesign: FlatUsage: Electric onlyOrientation: VerticalHorizontal Tubes: 24 (Round 22mm Diameter)Vertical Tubes: 2 (D Profile 40mm x 30mm)Tube Layout: 10 + 6 + 5 + 3Number of Gaps: 3
Mountings: 4 x adjustable brackets, plugs, screws and airventGuarantee: 5 Years on towel rail & 1 year on electric element which is replaceable and changeable.
This is an electrical item and should be installed by a qualified electrician. Use with caution as the towel rail surface may get hot for delicate skin.
Related Products & Parts