Shopping Basket
No items added.

Technical Information of Our Ladder Type Towel Rail Radiators

There are 3 possible ways you can introduce a towel radiator to your bathroom. These are;

        1. Central Heating

        2. Electric Only use

        3. Dual Fuel use

Please use the coloured boxes below to find more about each usage types and parts required. To help you understand which part goes where and to give you some visual aid, we have created our connection types page which you can reach by clicking on the green box below. This page illustrates possible connection types for heated towel rails. You may also have a look at our 5 Steps Buyer's Guide for more information.

If you are still not sure about which product suits you most or simply have further questions, you can also visit our "Heated Towel Rails Frequently Asked Questions" section or alternatively call our Sales Department on 020 8892 0932 where a member of our team will be happy to help you.
Central Heating Connections Electric Only Use Dual Fuel Heated Towel Rails Heated Towel Rails Connection Types
Please find below technical information and drawings of our standard ladder type towel radiators. Additional information can be found in the following files in PDF format.
Towel Radiator Fitting and Installation Guide (new window in PDF format - 1.04MB)
Bathroom Zones (new window in PDF format - 240KB)
 
 
 
 
 

W = Width of the towel radiator
H = Height of the towel radiator
D = Depth of the towel radiator (30mm)
PC = Pipe centres of the towel radiator
C = Connection threads (1/2" BSP)
X= Recommended gap between the vertical bar and wall bracket (30mm)
Y* = The distance between the wall and the centre of the air vent (bleed valve)*

  • *All towel radiators are supplied with 4 adjustable brackets enabling you to adjust the distance between the wall and the centre of the radiator (centre of the air vent - bleed valve) to a value between 75mm and 105mm
  • Please note that the actual projection from the wall to the front of the radiator is minimum 90mm and maximum 120mm. These figures only apply to FLAT radiators. You will need to add an additional 30mm to 60mm to CURVED radiators. i.e., a 400mm wide curved radiator will protrude approximately 30mm further than flat models whereas a 700mm wide curved radiator will protrude approximately 60mm more than that of the flat version.
 
QUICK INSTALLATION GUIDE FOR WALL BRACKETS
 
 
     
 
What is BTU?
Short for British Thermal Unit, British standard unit of energy. One Btu is equal to the amount of heat required to raise the temperature of one pound of liquid water by 1 degree Fahrenheit at its maximum density, which occurs at a temperature of 39.1 degrees Fahrenheit. One Btu is equal to approximately 251.9 calories or 1055 joules.

What is my BTU requirements?
You can use our BTU Calculator to determine the BTU required for your bathroom.