Pick up a modern chrome designer towel radiator today with our new 500mm x 800mm EMRENO radiator. It’s edgy design with square shaped vertical profile tubes and flat face rectangular tubes, our EMRENO designer radiator is capable of giving almost 1,000 Btu/h for your bathroom while keeping your towels nice and warm, ready for you to use as soon as you need them.
Whichever way you install this radiator, either left - or right - hand side will be fully open all the time allowing you to simply slide your towels from the side, instead of feeding through the tubes like you would normally do with a standard ladder type towel radiator.
Width: 500mm Height: 800mm Pipe Centres: 80mm Wall to Pipe Centres: 65-75mm Total Projection: 95-105mm Heat Output: 274 Watt - 934 BTU/h @ Delta 50Water Intake:3.34 litresPressure:6Bar (Safety Tested) Finish: Chrome Plated Material: Mild Steel Design: Ladder Style Flat Heated Towel Radiator Usage: Central heating / Electric only / Dual fuel (Please note additional parts will be required for each usage type) Orientation: Vertical Horizontal Tubes: 6 (Rectengular 68mm x 12mm) Vertical Tubes: 2 (Square 35mm x 35mm) Tube Layout: 1 + 1 + 1 + 1 + 1 + 1 Number of Gaps: 5 Mountings: 4 x adjustable brackets, plugs, screws and airvent Guarantee: 5 Years
Please find below 3 possible ways to use this towel radiator together with pictures and drawings which will help you visualize the connections and help you decide what parts you require.
Start with selecting from options below depending on how you wish to use your towel rail. If you are looking for a central heating or dual fuel type usage, you will then need to select the location of your pipe work (wall or floor) to view relevant options and parts required for your selection.
Option 1 - I want to use this towel rail as Dual Fuel - What Parts do I need?
1.A) My pipes are coming out from the WALL - Dual Fuel
When your pipe work is coming out from the wall, there are 3 possible ways to achieve a dual fuel towel rail connection. 1st option below is the best solution in terms of ease of installation and the overall look once the connection is final. This is achieved by using a set of radiator valves specifically designed for dual fuel towel rails. These valves have T pipes built-in allowing elements to be inserted directly below, while the pipe work outlet is facing to back wall.
Usually on dual fuel towel rails, pipe work need to be arranged wider than the towel rail. However with these special valves, pipe work can be in line with the towel rail as if it is a straight forward central heating connection only.
1.A.1) Dual Fuel - Pipes from Wall # Corner Valves option (recommended)
1.A.2) Dual Fuel - Pipes from Wall # Two T- Pipes option
1.A.3) Dual Fuel - Pipes from Wall # One T- Pipe option (not recommended)
1.B) My pipes are coming out of the FLOOR - Dual Fuel
1.B.1) Dual Fuel - Pipes from Floor # Two T- Pipes option (recommended)
1.B.2) Dual Fuel - Pipes from Floor # One T- Pipe option (not recommended)
Option 2 - I want to use this towel rail as part of Central Heating - What Parts do I need?
2.A) My pipes are coming out from the WALL - Central Heating
2.B) My pipes are coming out from the FLOOR - Central Heating
Option 3 - I want to use this towel rail as Electric Only - What Parts do I need?
Related Products & Parts